5
6
11. Modes: 0: stop
1: Low
2: Medium
3: High
1. Take out the motor with Switch assembly base/ Outer Tube.
2. Locate the outer tube (as shown in the above image) on the outer base
(as shown in the above image) and tighten with 4 no. screws and nuts provided.
3. Slide down the base canopy (as shown in the above image) on the outer tube,
by unscrewing the height adjustment collet. Screw back the height adjustment collet
to position after placing the canopy.
4. Place the motor with switch assembly on the inner tube (as shown in the above image)
and tighten it with the knob screw, then adjust the height as per the requirement with
the height adjustment collet.
5. Unscrew the lock-nut and the plastic nut from the motor shaft and the front cowl.
6. Fix back the guard and tighten with the front cowl nut.
7. Slide the plastic blade on the motor shaft, and tighten the blade with the lock-nut,
but rotating it in an anticlockwise direction.
8. Place the front guard and align the plastic ring with the front and back guard and then
tighten the plastic ring screw.
9. The oscillation mechanism can be activated by pushing the oscillatory knob downward
and the fan can be put into a stationary position, by gently pulling the oscillatory knob.
10. The speed of the fan can be regulated through a speed control switch fitted on the
switch box by pressing the relevant buttons.
Assembly of the Table Fan: