4. Squeeze the two Brake arms together (A). Insert the Brake Cable Guide (B) into the
cut-out in the Guide Bracket (C). Make sure the Brake Cable Guide (B) is seated securely in
the Guide Bracket (C) cut-out.
ASSEMBLE THE FRONT WHEEL TO THE FORK:
Loosen the Front Brakes:
1. Squeeze the two Brake arms together (A). Lift out the Brake Cable Guide (B)
from the Guide Bracket (C).
Install the Front Wheel:
2. Set the Front Wheel (3) into the front fork (4) (fig 03). Install wheel retainers (5) making
sure the tabs are in the Fork Retainer Holes (C).
3. Attach the front wheel with the Axle Nuts (6). Tighten Axle Nuts to 21 ft-lbs.
WARNING:
Do not use Nuts (6) without serrations to attach the front wheel.
NOTE: Ensure wheel spins freely without contacting fork or fender.
WARNING:
Put the wheel in the centre of the fork and tighten both nuts to the recommend-
ed torque of 21 ft.-lbs.
WARNING:
Failure to obey these steps can allow the front wheel to loosen while riding.
This can cause injury to the rider or to others.
11
12
RE-ATTACH FRONT BRAKE CABLE: