Lifelines PL00000 Manual Download Page 25 | Manualshive

Page: 25 / 53

Lifelines PL00000 Manual Download Page 25

21

DM00003 Rev D

SYSTEM

MANUAL

7�3 Setting Up the Video and IR Illuminator Assembly

1

2

Fig 7: Video assembly

Next, mount the video camera assembly on the tripod.

To set up the video camera

1.  Unfold and assemble the video tripod.
2.  Remove the video assembly from the case. Slide it onto the tripod, then tighten the rail lock.
3.  Use the USB 2.0A to Mini-B cable (DP00812) to connect the assembly to the USB port on the back of the Trackit M.

Connect the camera to power using the provided power supply.

To set up the PTZ camera

1. Unfold and assemble the video tripod.
2. Remove the PTZ camera from the case.

Screw the camera to the tripod by rotating the

camera base. Ensure a secure fit.

3. Use the network cable in combination with

the Ethernet to USB adapter to connect the

camera to the USB port on the back of the

Trackit M. Connect the camera to power using

the provided PTZ camera power supply.

Fig 8: PTZ Camera Assembly

Setting Up the Trackit M

«
...
23
24
25
26
27
...
»

Summary of Contents for PL00000






















































Reviews:

No comments