background image

 

23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUADRICEPS STRETCH 

With one hand against a wall for balance, reach behind you and pull 

your right foot up.    Bring your heel as close to your buttocks as 

possible.    Hold for 15 counts and repeat with left foot. 

HAMSTRING STRETCHES 

Extend your right leg.    Rest the sole of your left foot 

against your right inner thigh.    Stretch toward your toe 

as far as possible.    Hold for 15 counts.    Relax and then 

repeat with left leg. 

CALF/ACHILLES STRETCH 

Lean against a wall with your left leg in front of the right and 

your arms forward.  Keep your right leg straight and the left 

foot on the floor; then bend the left leg and lean forward by 

moving your hips toward the wall.    Hold, then repeat on the 

other side for 15 counts. 

TOE TOUCHES 

Slowly bend forward from your waist, letting your back and 

shoulders relax as you stretch toward your toes.    Reach as far as 

you can and hold for 15 counts. 

INNER THIGH STRETCH 

Sit with the soles of your feet together and your knees pointing 

outward.    Pull your feet as close to your groin as possible.   

Gently push your knees toward the floor.    Hold for 15 counts. 

Summary of Contents for 75303

























Reviews: