21
Tool:
Multi Hex Tool with
Phillips Screwdriver
STORAGE
Pull out the Pin (76), and then fold the Front Frame (1) and the Rear Frame (3).
When the inversion table is displayed in a store, or when it is not in use, it should be locked
with the Tube Clamp (87) to prevent unsupervised use. Use a Phillips screwdriver to undo
the screw on Tube Clamp (87) to unlock the Tube Clamp (87). Then use the Tube Clamp
(87) to connect both Adjustable Boom (8) and front bar of the Front Frame (1) together as
shown in illustration above. To prevent removal please tighten the screw.
76
1
3
87
8
1
