17
Get to inversion
Get to vertical inversion
Calibrating the Brake
The brake might become loose after long period of time of
use. To calibrate, insert the Phillips Screwdriver into the
hole as indicated on the diagram, turn the calibrating inside
clockwise no more than 1/4 turn.
Push
the
Lock Handle Plastic
Bar to UNLOCK position.
With both hands on handles,
slowly lie down.
1
When you’re at desired angle, pull
the
Lock Handle Plastic Bar forward
to LOCK position to lock the bed.
2
Push against the Inversion Bar
with left arm.
1
Pull
the
Lock Handle Plastic
Bar to LOCK position.
2
