Bluetooth Headset LnS-IE350 User manual
1.Notice Before Using
Thank you for purchasing the Bluetooth® Headset LnS-IE350 Please read this User Manual completely before you use the Headset.
LnS-IE350 is designed for listening high quality music wirelessly using the latest Bluetooth® wireless technology. LnS-IE350 can be
easily connected to a mobile phone for call conversation and music listening, it is also able to connect to the other Bluetooth®-
enabled devices like Notebook, iPod etc. IE350 is compliant with Bluetooth V3.0 specification, supports HSP, HFP, A2DP and AVRCP
profiles. Please make sure your phone or other device supports these profiles.
2. Specification
Bluetooth specification: V3.0
Operation frequency: 2.402-2.48GHz
Supported profile: HSP, HFP, A2DP,AVRCP
Operation range: Up to 10 meters
3.Package Contents List
Please inspect this package and refer to the package contents list below to verify all items were included:
1) SH802 Bluetooth® headset(1) 2) USB Charging Cable(1)
3) User's Manual(1) 4) Ear Cap (2x3 Sizes )
5) Ear fit kits(2)
4. LnS-IE350 Bluetooth® Headset Overview
1. Ear Cap
2. Indicator
3. Volume Up/Previous
4. Volume Down/Next
5.Battery information
The device is equipped with an integrated lithium-polymer battery. The battery cannot be replaced. Do not attempt to remove the
battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two
or three complete charging/discharging cycles. The battery can be charged and discharged several hundred times, but it loses its
capacity over time.
Disconnect the IE350 from the power supply as soon as the battery is fully charged, as overcharging would reduce the service life of
the battery. A charged battery will lose its capacity if it is not used on a regular basis.
Important: Ensure that the battery is fully charged if you do not use the device for a long period of time. To avoid complete
discharge of the battery, the IE350 should be charged at least every 3 months.
6.Charging the battery
The IE350 is operated with a rechargeable battery. Charge the battery completely before its first use. Read the section "Battery
information" before starting the charging process.
1) Connect USB cable to a general USB power supplier. 2) Connect the charger to the correct outlet.
3) When the charger is connected to the headset, the red indicator light will turn on. Charging the battery fully may take up to 1
hour.
4) When the battery is fully charged, the red indicator light will turn blue. Disconnect the charger from the headset and the outlet.
The headset is ready to use.
NOTE:
- For first time use, please charge the headset fully.
- The fully charged battery has power for up to 5 hours of talk-time and 4.5 hours music
playing time, and up to 300 hours of standby time. However, the talk and standby times may
vary when used with different mobile phones or other compatible Bluetooth® devices, usage
settings, usage styles, and environments. When the battery power is low, the headset will
Talk time: 5 hours
Play time: 4.5 hours
Standby time: 300hours
Charge time: 1 Hours
5. Answer
6. Power/Play
7. Microphone
