Selected Anchor
Design Resistance in Tension *
KH-EZ ¼” x 4”
830 lb
HUS-H 6MM x 120MM
3.3 kN
KH-EZ 3/8” x 4”
1535 lb
KH-EZ 3/8” x 5”
1535 lb
HUS-H 8MM x 120MM
3.3 kN
HUS-H 8MM x 150MM
3.3 kN
HSL-3 M 8/40
2000 lb
HST M12 x 115/20
8 kN
HST M12 x 195/200
8 kN
KB-TZ 3/8” x 3-3/4”
1615 lb
* Design strength extracted from the Hilti Anchor Fastening Technology Manual issued September 2014.
Tools Required
WARNING: Adhere to manufacturer’s equipment warnings and guidelines. Follow manufacturer’s instructions
for proper usage.
Dynamic Anchor
• Floor scanner / rebar detector (optional)
• 1” L-shape SDS rotary hammer
• 12mm x 305mm carbide drill bit
• Blackhawk
™
by Proto
™
3/8” ratcheting micrometer adj. torque wrench (34870- A)
• Rubber mallet/dead blow hammer
• Safety glasses
• Extension cord
• Vacuum (for debris)
Page 46 of 48
