Lievers K-150, User Manual, Page: 20 / 52

20/52 Gebruikershandleiding / User Manual / Bedienungsanleitung K-150, rev. 1.2: 14-03-2019
The following safety-aspects specifically apply to those Lievers products which are
equipped with a petrol-engine:
▪
Make sure that there is sufficient ventilation in spaces which are surrounded by walls.
▪
inhaling exhaust gasses can damage your health.
▪
To avoid getting an electric shock, do not touch the spark plug or spark plug cap while the
engine is running
▪
Check for fuel leaks before running the machine.
▪
Wear working-gloves, safety glasses and protecting clothing during refueling.
▪
Make sure that there is sufficient ventilation during refueling.
▪
Refueling is only allowed after the engine has been cooled off sufficiently. Refueling, while
the engine is hot, might lead to a very dangerous situation.
It is strictly forbidden to refuel:
▪
in the direct vicinity of open fire or other flammable materials,
▪
while smoking cigarettes etc.
▪
in explosion endangered spaces.
6. Use
This chapter describes the use of the complete range of K-150 bullfloats
F
OR THE LOCATION AND DESCRIPTION OF THE
K-150
SCREED PARTS
,
WHICH ARE MENTIONED IN
THE TEXT
,
WE REFER TO FIGURE
2
ON PAGE
16.
6.1. Assembling the bullfloat
When delivered the bullfloat is not ready-for-use. You have to carry out the following
procedures:
1) Connect the switch ( an ON/OFF-switch, electronic speed regulator or throttle), to the
operating handle by means of the bracket and the butterfly nut. Now lock the bracket by
tightening the butterfly nut.
1) Stick the operating handle into the shaft of the motor unit-frame. Make sure that the
operating handle is locked properly.
Fig. 6: Assembly of the controls