OPERATION
WARNING - Do not operate this appliance for longer than 1 minute at a time
as this could cause overheating. If this time has elapsed, the appliance has to
cool down for at least 60 seconds.
WARNING - After you have used the appliance three times, a pause of around
10 - 15 minutes is necessary.
When making smoothies or fruit shakes without bits, we recommend that you mash or
puree the fruits before adding it to the mixing container.
1. Place ingredients to be mixed in container. Pay attention to the capacity!
2. Make sure that the control switch is set to „O“ (Off) and connect the appliance into a
correctly installed and earthed socket.
3. If necessary, remove the switch by pass clip, to place the mixing container under the
container support.
4. Place the container under the mixing shaft, slide it upwards under the container
support and make certain that the container is snapped in place and that the
container bottom is on container rest.
NOTE: The appliance will only operate when the container is correctly positioned. If you
don’t want to use the container support, attach the switch by pass clip.
5. Move control switch to desired speed to process. Start with speed “I” (low) then
increase to speed “II” (high) if desired.
6. Mix until you achieve the desired consistency. When finished, switch it to „O“.
7. To remove the container press it slightly upwards and at the same remove it from
the container support.
8. If you want to end the operation, unplug the appliance.
CAUTION - Do not add ingredients to be mixed whilst the appliance is
running!
– 21 –