• To protect against fire, electric shock or personal injury, do not immerse cord, plug or
base unit in water or other liquids. Risk of electric shock and fire!
BEFORE FIRST USE
UNPACKING
• Carefully unpack the Shake Mixer and remove any packaging material and check all
the parts are undamaged. Do not use your appliance if it has been damaged or if the
power cord or plug is damaged.
• Check that the scope of delivery is complete.
• Remove any promotional labels or stickers from the appliance before the first use. DO
NOT remove the appliance data plate.
WARNING – The plastic bags used to wrap this appliance or the packaging
may be dangerous. To avoid risk of suffocation, keep these bags out of reach
of babies and children.
INSTALLATION
1. Place your Shake Mixer on a stable, flat, clean, dry, and non-slip surface.
2. When used for the first time, clean the appliance and its accessories as described in
“CLEANING AND CARE”.
3. Ensure that the control switch is set to „O“ (Off), before plugging the appliance into
a correctly installed and earthed socket.
CONTROL SWITCH FUNCTIONS
O OFF
I ON with a low speed setting
II ON with a high speed setting
CAPACITY
The maximum capacity is 500 ml. Please use the scale on the container and do not
overfill!
• Fill the mixing jug to 500 ml (max.), if you want to mix using the low speed setting (I).
• Fill the mixing jug to 450 ml (max.), if you want to mix using the high speed setting (II).
NOTE: For liquids which tend to foam and increase their volume (e.g. milk or cream) we
recommend only filling the container up to 300 ml.
– 20 –