9
F2.6 Access to Target Weight for Weight Checking and Sorting, and
Counting Sample Weight
Selectable Parameters: 0 ---- Access to Platform Weighing (default
value)
1 ---- Manual Input Access
F3 Energy-saving Parameter Setting
F3.1 Time-out Screensaver Time Setting
Selectable Parameters: 0~ 99 minutes, (default value: 30 minutes)
If set to be 0, this function shall not be allowed.
During the screen protection, the display will randomly show “ ”.
F3.2 Energy-saving Time Setting for Auto Power-off
Settable Parameters: 0~250 minutes. (default value: 150 minutes)
If set to be 0, this function shall not be allowed.
F3.3 Display Brightness Control
Selectable Parameters: 0---- low light level
1 ---- middle light level (default value)
2 ---- high light level
F4 Serial-port Setting
F4.1 Setting of UART0 Communication Interface Parameter
F4.1.1 Communication Mode
Selectable Parameters:
0
---- no output (default value)
1
---- continuous output protocol A
2
---- continuous output protocol B
3
---- continuous output MT
4
---- firm output protocol A
5
---- firm output protocol B
6
---- key dispatch protocol A
7
---- key dispatch protocol B
F4.1.2 Setting of Data and Check Pit
Selectable Parameters: 8_N_1 ---- 8-pit no parity check (default
value)
7_E_1 ---- 7-pit odd parity check