AS-2H-WP Installation Guide
17
RS232 Control
Switching Commands
Default RS232 Settings: 9600 baud, 8 Data bits, 1 Stop bit, Parity = None
<CR>
= Carriage return (Hex 0D)
<LF>
= Line Feed (Hex 0A)
Power Management
In addition to going to a low-power mode when using the Display Control functions, the AS-2H-WP can also be set
to this mode via RS232.
Description
Command
Response
Enter low-power mode
STANDBY<CR><LF>
STANDBY!<CR><LF>
Exit low-power mode
WAKE<CR><LF>
WAKE!<CR><LF>
Description
Command
Response
Select HDMI input 1
SET HDMI1<CR><LF>
SET HDMI1!<CR><LF>
Select HDMI input 2
SET HDMI2<CR><LF>
SET HDMI2!<CR><LF>
Get selected input
GET IN<CR><LF>
GET IN!<CR><LF>
AND
HDMI1 1!<CR><LF>
OR
This response indicates HDMI input 1 is
selected
HDMI2 1!<CR><LF>
This response indicates HDMI input 2 is
selected
Get HDMI 1 video status
GET HDMI1<CR><LF>
HDMI1 1!<CR><LF>
OR
This response indicates video present on
HDMI input 1
HDMI1 0!<CR><LF>
This response indicates no video present
on HDMI input 1
Get HDMI 2 video status
GET HDMI2<CR><LF>
HDMI2 1!<CR><LF>
OR
This response indicates video present on
HDMI input 2
HDMI2 0!<CR><LF>
This response indicates no video present
on HDMI input 2
Get Auto-switching state
GET AUTO<CR><LF>
AUTO ON!<CR><LF>
OR
AUTO OFF!<CR><LF>
Summary of Contents for Intelix AS-2H-WP
Page 2: ......
