USER MANUAL / DL-PSMV62
8
Installation Instructions
Mount the Matrix
Rack Mounting Instructions
At least 2 inches of free air space is required on both sides of the DL-PSMV62 for proper side
ventilation. Avoid mounting the DL-PSMV62 near a power amplifier or any other source of significant
heat.
Attach the supplied mounting clamps to the sides of the DL-PSMV62 matrix. The switcher requires one rack
unit (1 RU) of space. It is recommended that you leave an empty rack space above and below the DL-PSMV62
for additional cooling.
Connect Sources
Connect source devices to the HDMI, Display Port or USB-C inputs. When using HDMI
cables for source inputs, use a High Speed HDMI cable that is less than or equal to 1.5
meters in length for 4k60 signals and 5 meters for 1080p signals.
When connecting a source device to the USB-C input using a USB-C cable, be sure the
USB-C cable is a USB 3.2 Gen1 cable capable of supporting video and is no longer than
3 meters (10’) in total length. The DL-PSMV62 USB-C input supports ALT-DP mode for
video, to ensure a laptop is compatible with the DL-PSMV62 check the laptops capability
of supporting this mode.
Note that not all laptops with USB-C port options will support video or more specifically ALT-DP video
mode�
Video Inputs
Summary of Contents for DL-PSMV62
Page 4: ...USER MANUAL DL PSMV62 4 ...
