DL-SC41U-TX Installation Guide
7
Installation Instructions
Mount the Matrix
At least 2 inches of free air space is required on both sides of the DL-SC41U-TX for proper side ventilation. Avoid
mounting the DL-SC41U-TX near a power amplifier or any other source of significant heat.
Connect Sources
Connect source devices to the HDMI, Display Port, or USB-C inputs. When using HDMI cables for source inputs,
use a High Speed HDMI cable that is less than or equal to 5 meters in length for 4k60 signals and 8 meters for
1080p signals.
When connecting a source device to the USB-C input using a USB-C cable, be sure the USB-C cable is capable of
supporting video and is no longer than 2 meters (6.6’) in total length. The DL-SC41U-TX USB-C input supports
ALT-DP mode for video, to ensure a laptop is compatible with the DL-SC41U-TX check the laptops capability of
supporting this mode.
Note that not all laptops with USB-C port options will support video or more specifically ALT-DP video
mode�
Video Inputs
Connect Displays
HDMI Outputs
Connect display devices to the HDMI 1 and 2 output using a High Speed HDMI cable that is less than or
equal to 5 meters in length for 4k60 signals and 8 meters for 1080p signals.
Connect a solid core CAT6 F/UTP rated category cable to the
DL-SC41U-TX
HDBaseT output and the
optional HDBaseT receiver (DL-SCU-RX). Use TIA/EIA-568B wiring for Category 6 connection between
the
DL-SC41U-TX
and the receiver. See page 10 for
HDBaseT Cabling Requirements.
Connect a display device to the HDMI output of the HDBaseT receiver using a High Speed HDMI cable
that is less than or equal to 5 meters in length for 4k60 signals and 8 meters for 1080p signals.
HDBaseT Output (Optional)