manualshive.com logo in svg

LIBERTY AV SOLUTIONS DIGITALINX DL-SC41U-TX, Owner'S Manual, Page: 28 / 29

Share
Download
LIBERTY AV SOLUTIONS DIGITALINX DL-SC41U-TX Owner'S Manual Download Page 28

DL-SC41U-TX Installation Guide

28

Technical Specifications

Video

Video Inputs

(2) HDMI, (1) Display Port, (1) USB-C

Video Input Connector

(2) HDMI type A, (1) Display Port, (1) USB-C

Input Video Signal

HDMI for HDMI input, DisplayPort 1.2 for Display Port,

ALT-DP Mode for USB-C

Video Output

(1) HDMI, (1) HDBaseT

Video Output Connector 

(1) HDMI type A, (1) RJ45

Input Resolution Support

HDMI / Display Port: Up to 3840 x 2160 @60Hz / 4:4:4 / 8 bit deep color 

USB-C: Up to 3840 x 2160 @30Hz / 4:4:4 / 8 bit deep color

Output Resolution Support

HDMI: Up to 4K@60Hz 4:4:4

HDBaseT: Up to 4K@60Hz 4:2:0

Standards

Compliant with HDMI 2.0b, HDCP 2.2 and CEC

Bandwidth

All Inputs: 18Gbps

HDMI Output: 18Gbps

HDBaseT Output: 10.2Gbps

HDBaseT 2.0 Transmission Distance

1080P @ 70m or less when using Cat6 F/UTP, 4K @ 40m or less when 

using Cat6 F/UTP 

USB

Supported USB Standard

Local Switcher: Up to USB 3.0 @ 5Gbps

HDBaseT 2.0 Receiver (optional): Up to USB 2.0 High Speed up to 

190Mbps

USB Port Types

(2) USB B (Host)

(1) USB C (Host)

(2) USB A (Client)

Audio

Supported output formats

HDMI Embedded: LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby 

Digital® Plus, DTS: X™, and DTS-HD® Master Audio™ pass-through

Device Control Parameters

Ethernet

100BaseT

RS232 Baud Rate

9600 baud (default)

Chassis and Environmental

Dimensions (WxHxD)

220 mm x 44 mm x 130 mm (8.7 in x 1.7 in x 5.1 in)

Shipping Weight

605g (1.3lbs.)

Operating Temperature

0° to +55° C (+32° to +131° F)  

Operating Humidity

10% to 90%, Non-condensing

Storage Temperature

-20° to +70° C (+14° to +158° F)

Storage Humidity

10% to 90%, Non-condensing

Power, ESD, and Regulatory

Power Supply Input

100V-240VAC / 50-60 Hz

Power Supply Output

24VDC / 5A 

Power Consumption

32  watts (68 watts MAX with USB-C power charging support)

USB-C Power Consumption

40 watts

ESD Protection

15kV

Product Regulatory

FCC, CE, RoHS

Power Supply Regulatory

CE, RoHS

Other

Standard Warranty

5 years

Included Accessories

Quick Install Guide, Power Supply with US, UK, AU and EU power plugs, 

(1) 3-pin to DB9 RS232 Cable, (2) Mounting clips with screws and (4) 

plastic cushions

Summary of Contents for DIGITALINX DL-SC41U-TX






























Reviews:

No comments