Libelium waspmote plug & sense Technical Manual Download

Page: 140 / 162

-140-

v5.8

Installation

26. Installation

The right behavior of Waspmote Plug & Sense! depends on a reliable installation. Libelium provides the necessary accessories

to make it easier, like cable ties, mounting feet and other accessories.

Wherever Waspmote Plug & Sense! is placed, please be sure you tight it firmly and the enclosure is not affected by wind,

vibrations and other environmental conditions. Libelium does not take responsibility of damages to third parts caused by a bad

installation. Moreover, it is recommended to power off Waspmote Plug & Sense! during its installation.

26.1. Parts

Mounting feet

Libelium provides four mounting feet accessories to allow easy fixing Waspmote Plug & Sense! to walls, etc. Mounting feet come

already fixed to the enclosure using a screw, as shown in figures below.

Figure : Mounting feet accessory

The mounting feet come assembled in vertical position.

Figure : Mounting foot in vertical position

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands

Libelium waspmote plug & sense, Technical Manual

Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands