-117-
v5.8
Interacting with Waspmote Plug & Sense!
The next step is to specify the port on which Waspmote has been connected, in this case the system recognizes it as ‘COM9’, (this
will vary on each computer):
Figure : Step 2 of establishing connection
The next step is to specify the speed and configuration parameters:
Figure : Step 3 of establishing connection
Once these steps have been performed connection with Waspmote has been established, and listening to the serial port begins.
The following image shows this application capturing Waspmote’s output, while the example code ‘Waspmote Accelerator Basic
Example’ is run.
