manualshive.com logo in svg

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Technical Manual, Page: 133 / 144

Share
Download
Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Technical Manual Download Page 133

-133-

v8.6

Documentation changelog

32. Documentation changelog

From v8.6 to v8.7

 

•

Added references to the new XBee ZigBee 3 radio

From v8.5 to v8.6

 

•

Added changes related to the new version of Smart Parking

 

•

Deleted references to the discontinued H2, HCl, HCN, PH3, ETO and Cl2 sensors for Smart Environment PRO 

and Smart Cities PRO

 

From v8.4 to v8.5

 

•

Deleted references to the discontinued Smart Agriculture Sensor Board (“normal” version)

From v8.3 to v8.4

 

•

4G US module LE910 NAG was discontinued, now Libelium offers the LE910 NA V2 (different bands, no 2G and 

no GPS)

From v8.2 to v8.3

 

•

  Renamed from Hive to Bridge

From v8.1 to v8.2

 

•

Deleted references to the discontinued RS-232 module

 

•

Deleted references to the discontinued Calcium (Ca2+) sensor for Smart Water Ions Single

From v8.0 to v8.1

 

•

Added information about the Hive

 

•

Deleted references to the discontinued Carbon Monoxide (CO) sensor probe for high concentrations 

[Calibrated]

From v7.9 to v8.0

 

•

Added information about the new Smart Water Xtreme line

 

•

Changed Meshlium images due to new enclosure

From v7.8 to v7.9

 

•

Added references to new LoRaWAN ASIA-PAC / LATAM module

From v7.7 to v7.8

 

•

Deleted references to the discontinued Gases Sensor Board

From v7.6 to v7.7

 

•

Added information about the new Smart Agriculture Xtreme line

 

•

Added references to new LoRaWAN IN module

 

•

Changed specifications of the SD card, now 16 GB

From v7.5 to v7.6

 

•

Added references to new Sigfox AU / APAC / LATAM module

 

•

Added references to new LoRaWAN AU module

Summary of Contents for Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Reviews:

No comments