ColorSave 1000ST-INJ user manual
8
2.2 Feeding (dosing) Screws
Choosing the right feeding screw is essential for achieving the required dosing accuracy. The
following table shows the screws available and their material dosing capacities:
Feeding Screw
Capacity
0
Micro-capacity
1-3 pellets/shot
1.1
Low-capacity- standard
0.1 – 4 Kg/hr
1
Low-capacity – smooth*
0.1 – 4 Kg/hr
2
Medium-capacity
0.2 – 10 Kg/hr
3
High -capacity
0.4 – 18 Kg/hr
4A
Extra-capacity (3/4")
0.6 – 35 Kg/hr
* for particular materials – consult with your LIAD representative
Notes:
a) Indicated screw capacity values are typical for free flowing granular 0.7 Kg/L bulk density
materials. Actual capacity depends on actual material features such as bulk density, flow ability,
pellet size etc., and also on the hopper volume.
b) The identification number is marked on each screw (micro screw is marked with "C").
c) Please consult with LIAD regarding higher capacity screws.