LI-COR LI7200RS, Instruction Manual

Page: 80 / 226

Section 3. Operation
Data:
After connection, Click on the
Data
tab to display a list of biomet sensors con-
figured for use with the selected datalogger (under
Sensor Name
). The list displays
the Sensor Properties (Type, Units, and Value) for the selected sensor. Note that the
Sensors
and
Sensor Properties
are configured through the datalogger software; this
list is for reference only.
Note: Enable the
Sync clock to 7550
under
Site Setup > Biomet
to synchronize
the datalogger and LI-7550 clocks.
Refer to the LI-COR Data Acquisition Sytem or the Biomet System (Sutron) instruc-
tion manuals for more information.
Connecting with the SmartFlux or SmartFlux 2 System
The SmartFlux window in the Windows software displays a list of all SmartFlux 2
Systems that are connected to your network of sensors. In this window, select your
system and connect to it by clicking the
Connect
button.
3-38 LI-7200RS Enclosed CO₂/H₂O Analyzer