LI-COR LI7200RS, Instruction Manual

Page: 77 / 226

Northward Separation (cm) (mandatory) :
North/south distance between the LI-7700
Analyzer and the reference anemometer. Positive values if north and negative val-
ues if south of the anemometer.
Eastward Separation (cm) (mandatory) :
East/west distance between the LI-7700 Ana-
lyzer and the reference anemometer. Positive values if east and negative values if
west of the anemometer.
Vertical Separation (cm) (mandatory) :
Vertical distance between the LI-7700 Ana-
lyzer and the reference anemometer. This value is negative if the center of the LI-
7700 sample volume is below the center of the reference anemometer sample
volume and positive if the gas sample is above.
Select variables
In the Site Setup dialog, click to select the recommended variables for pro-
cessing in EddyPro and the SmartFlux System or SmartFlux 2 System or click
Select All to log all variables.
The LI-7700 data values to be logged to the USB drive are chosen under CH
4
Log
Values. In addition, you can enable the ‘Log LI-7700 status records (.status)’ check
box to collect LI-7700 STATUS records. The log values available for the LI-7700
Open Path CH
4
Analyzer include:
Section 3. Operation
3-35 Select variables