LI-COR LI7200RS, Instruction Manual

Page: 72 / 226

Section 3. Operation
Figure 3-3. Eastward and northward separation of the gas analyzer relative to the sonic
anemometer.
Figure 3-4. Vertical separation of the gas
analyzer sample path or inlet relative to
the sonic anemometer.
Northward Separation (cm) (mandatory) :
North or south distance between the LI-
7500A/RS sample path or LI-7200/RS
inlet and the anemometer. Positive values
if north and negative values if south of
the anemometer.
Eastward Separation (cm) (mandatory) :
East or west distance between the LI-
7500A/RS sample path or LI-7200/RS
inlet and the reference anemometer. Pos-
itive values if east and negative values if
west of the anemometer.
Vertical Separation (cm) (mandatory) :
Ver-
tical distance between the sample path or
inlet and the reference anemometer. This
value is negative if the center of the ana-
lyzer intake tube inlet is below the center of the reference anemometer sample
volume and positive if the inlet is above.
CO
2
/H
2
O Log Values (mandatory) :
Click
Default
to select data records recommended
for use with the SmartFlux 2 System and EddyPro Software.
3-30 LI-7200RS Enclosed CO₂/H₂O Analyzer