manualshive.com logo in svg

LI-COR LI-6400, Manual

Share
Download
LI-COR LI-6400 Manual Download Page 724

LPL Reference

The Reference

24-20

Using the LI-6400

24

AITGET

Get readings, and the times associated with them

Initial:

FAddr 

timeDest

, Num 

readings

,  Num 

group

Final:

Long 

actual

Get a groups readings along with the time associated with each reading.

ALPHA

Turns on/off the alpha (text) display.

Initial:

Logic 

onOff 

(0=off, 1=on)

Final:

-

Related Keywords: 

GRAPH

, 

GETALPHA

, 

GETGRAPH

AMOVE

Copy elements within an array

Initial:

Num 

to

, Num 

from

, Num 

nElements

, Array 

arr

Final:

-

Copies 

nElements

, starting at location 

from

, to location 

to

, in array 

arr

. 

AND

Logical AND (true if both non-zero)

Initial / Final: (see 

Two Value Logical Transforms

 on page 24-15)

Related Keywords: 

NOT

, 

OR

AOMAX

Returns max signal that can be put on a D/A channel

Initial:

Num 

chanNum

 (0..AONUM-1)

Final:

Double 

mV

Related Keywords:

AOSET

, 

AORES

, 

AOMIN

.

Table 24-9. 

Parameters for 

AITGET

timeDest

The address of the FLOAT variable or array that will 
contain the time information. If readings are greater 
than 1, then timeDest should be a FLOAT array, of 
size at least as big as readings.

readings

The number of sets of readings to transfer. This 
should be less than or equal to the groupÕs qSize, set 
via 

AIGDEF

. The number of sets that are actually avail-

able can be obtained from 

AIREADY

group

The A/D structure returned by a prior call to 

AIOPEN

.

actual

The actual number sets of readings read.

Summary of Contents for LI-6400















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands