LI-COR LI-6400, Manual

Page: 282 / 846

Data Logging
Making Your Own AutoPrograms
9-38 Using the LI-6400
9
12 Store the AutoProgram
You are given the opportunity to store the AutoProgram.
If you press
Y
, the Standard File Dialog is accessed for storing the file. The
default name of the file will be the sequence of selections you made, but you
can change it to something meaningful. In this case, the default name will be
BaCaEAA
, and the default directory will be
/User/Configs/AutoPrograms
. Renaming
it to Humidity Curve would be a good choice. The program is then exited. If you
wish to view or edit the AutoProgram that you have created, you can do so by
accessing the Filer, selecting the file, and pressing
E
.
If you press
N
, to not store the file, you will be given a chance to edit the Au-
toProgram you have created. When you exit the editor (Standard Editor), you
can save the file.
Example 2: A-Ci Curves at Various Light Levels
This example builds an AutoProgram that does a family of A-Ci curves, each
one at a different light level. The program will have this structure:
Store this AutoProgram?
(Y/N)
View/Edit this AutoProgram?
(Y/N)
Prompt for inputs
LOOP over light level
Set light level
Wait fixed time
LOOP over reference CO2
Set reference CO2
Wait for stability
Match if deltas are small
Log
END LOOP
END LOOP