LI-COR LI-600, Instruction Manual

Page: 120 / 131

B-1
Appendix B.
Warranty
Each LI-COR, Inc. instrument is warranted by LI-COR,
Inc. to be free from defects in material and workmanship;
however, LI-COR, Inc.'s sole obligation under this war-
ranty shall be to repair or replace any part of the instru-
ment which LI-COR, Inc.'s examination discloses to have
been defective in material or workmanship without charge
and only under the following conditions, which are:
1 The defects are called to the attention of LI-COR, Inc. in Lincoln,
Nebraska, in writing within one year after the shipping date of
the instrument.
2 The instrument has not been maintained, repaired or altered by
anyone who was not approved by LI-COR, Inc.
3 The instrument was used in the normal, proper and ordinary
manner and has not been abused, altered, misused, neglected,
involved in an accident or damaged by act of God or other cas-
ualty.
4 The purchaser, whether it is a DISTRIBUTOR or direct customer
of LI-COR or a DISTRIBUTOR'S customer, packs and ships or
delivers the instrument to LI-COR, Inc. at LI-COR Inc.'s factory in
Lincoln, Nebraska, U.S.A. within 30 days after LI-COR, Inc. has
received written notice of the defect. Unless other arrangements
have been made in writing, transportation to LI-COR, Inc. (by air
unless otherwise authorized by LI-COR, Inc.) is at customer
expense.