LGMG AS1932E, Operation And Safety Manual

Page: 15 / 68

LGMG North America Inc.
Operation and Safety Manual
7
⚫
Do not use the machine as a ground
for welding. This could cause
damage to the electrical components
on the machine.
△
! Explosion and Fire Hazards
⚫
Do not operate or charge the
machine in a location with a
potential for inflammable or
explosive gas or particles.
△
! Machine Damage Hazards
⚫
Do not use a damaged or
malfunctioning machine.
⚫
Make a complete operational and
function check before each shift.
Attach a tag on a damaged or
malfunctioning machine immediately
and stop all operation.
⚫
Be sure to perform all maintenance
and operation according to the
instructions in this manual.
⚫
Be sure to keep all labels and decals
at the appropriate locations. Replace
any that are not legible.
⚫
Be sure to keep this manual in the
manual box of the platform.
△
! Personal Injury Hazards
⚫
Do not operate the machine if it is
leaking hydraulic oil. Leaking
hydraulic oil under pressure can
pierce or burn skin.
⚫
Severe injury may result if any
component below the cover is
touched by mistake. Only trained
technicians can perform
maintenance to the components
under the cover. The operator shall
only perform maintenance before the
pre-operation inspection. Be sure to
keep all compartments closed and
locked during operation of the
machine.
1.4 Battery Safety
△
! Combustion hazards
⚫
The battery contains acid. Wear
protective clothing and safety
goggles when performing
maintenance on the battery.
⚫
Take measures to prevent acid from
overflowing out of the battery or
being touched. Neutralize the
overflowed acid material from the
battery with soda and water.
△
! Explosion danger
⚫
Keep the battery away from any
sparks or open flames. The battery
can release an explosive gas.