Operation Manual of Elevating Work Platform
43
the fork into the pockets.
6) Lift the machine by 15cm and slightly tilt the
fork backward to keep the machine stable.
7) Keep the machine level when lowering the
fork.
△
!
Notice
Component damage may result from the
machine being lifted from its’ side.
8.4 Lifting Precautions
1) Completely lower the platform. Be sure to
secure the extending platform, the controller
and the chassis tray. Remove all movable
components from the machine.
△
!
Notice
Use the center of gravity shown on the
lifting decal on the machine.
2) The spreader can only be attached to the
specified lifting point on the machine shown.
3) There are two lifting holes in the front panel
of the machine, and there are two lifting holes
in the rear end board to use for lifting the
machine.
4) Adjust the lock tool in such a way that the
machine is not damaged and the machine is
kept horizontal.
