1
2
Top
Side
Front
Back
3
4
5
6
7
8
9
10
11
LG QUAD
COMBO
™
UNIT
For more information about your LG QUAD Combo™ unit, please visit us online at lgmedsupply.com or call 1-888-633-7360.
QUICK REFERENCE GUIDE
PAGE 1
The purpose of this guide is to assist you in correctly operating your LG QUAD Combo™ unit. This
device should only be used under the continued supervision of a healthcare professional. This guide
is not intended to replace or substitute the LG QUAD Combo™ Instruction Manual. PLEASE READ THE
INSTRUCTION MANUAL COMPLETELY BEFORE USING THIS DEVICE. Read, understand and practice
the contraindications, warnings, cautions and operating instructions found on pages 8 – 13 on your
instruction manual. Always follow the operating instructions prescribed by your healthcare provider.
12
13
Channel 1 output socket
Channel 2 output socket
Channel 1 intensity increase button
Channel 1 intensity decrease button
Mode (M) selection button
LCD display
Channel 2 intensity increase button
Channel 2 intensity decrease button
Parameter (S) selection button
Power on/off button
Belt clip
Battery compartment cover
AC/DC adapter receptacle
1
2
3
4
5
6
7
8
9
10
11
12
13
ELECTRODES
(4 SETS)
LEAD WIRES
(2 SETS)
INDICATION FOR USE
The TENS / IF / MIC modes are often prescribed for:
• Symptomatic relief of chronic pain
• Post traumatic pain
• Post surgical pain
The EMS mode is often prescribed for:
• Relaxation of muscle spasms
• Increase of blood flow circulation
• Prevention of disuse atrophy
• Muscle re-education
• Maintaining or increasing range of motion
• Immediate post-surgical stimulation of lower
leg muscles to prevent venous thrombosis
Do not use this device for undiagnosed pain
syndromes until consulting a physician.
DEFINITIONS
TENS
Transcutaneous Electrical
Nerve Stimulator
IF
Interferential
MIC
Microcurrent
EMS
Electrical Muscle Stimulation/
Neuromuscular Stimulation
Live Pain Free, Live Good Today!
LG QUAD Combo
™
Use 4 electrodes when using the Interferential mode. Press
the
S
button to enter and cycle through to each setting state.
SET THERAPEUTIC PROGRAM
There are 4 programs available in IF therapeutic mode. The therapeutic program can be
selected by pressing the
s
and
t
buttons. The mode you selected will show up on the
top of liquid crystal display.
SET TIMER
Press the
S
button to enter this setting. The treatment time is adjustable from
1
to
60
minutes or Continuous. Press the
s
and
t
buttons to adjust setting. You
can set the timer to “Continuous” mode by pressing the
s
control when it shows
60 minutes. The output will be shut off when time is up. If in continuous mode, you
need to manually turn off device.
SET INTERFERENCE FREQUENCY (OPTIONAL)
Channel 1 has
4000
Hz fixed fundamental frequency. Channel 2 has selectable
frequency from
4001
to
4150
Hz; Interference frequency is adjustable from
1
Hz to
150
Hz. Only “P4” has this parameter setting. Press the
S
button to enter this
menu, and then press the
s
and
t
buttons to adjusting the setting.
IF SETTING
2
1
3
1
2
3
2
4
PAGE 4
QUICK REFERENCE GUIDE
Please see pages 37 and 38 of your LG QUAD Combo™ Instruction Manual for troubleshooting tips.
PROBLEMS WITH YOUR DEVICE?
SET CYCLE TIMER
Press
S
button after scrolling through and completing all settings to start the therapy
program. The the
s
and
t
buttons can be used to increase
s
or decrease
t
the
intensity level.
4
Press the
S
button to enter and cycle through
to each setting state.
SET THERAPEUTIC PROGRAM
There are 3 programs available in MIC therapeutic program:
Constant
,
Pulse Width
Modulation
, and
Pulse Rate Modulation
. The therapeutic program can be selected
by pressing the
s
and
t
buttons. The mode you selected will show up on the top of
LCD Display.
SET TIMER
Press the
S
button to enter this setting. The treatment time is adjustable from
1
to
60
minutes or Continuous. Press the
s
and
t
buttons to adjust setting. You
can set the timer to “Continuous” mode by pressing the
s
control when it shows
60 minutes. The output will be shut off when time is up. If in continuous mode, you
need to manually turn off device.
SET PULSE WIDTH
Pulse Width is adjustable from
2
ms to
200
ms. Press the
S
button to enter this menu,
then press the
s
and
t
buttons to adjusting the setting.
SET PULSE RATE
Pulse rate is adjustable from
1
Hz to
150
Hz. Press the
S
button to enter this menu,
and then press the
s
and
t
buttons to adjusting the setting.
SET CYCLE TIME (OPTIONAL)
Cycle time is adjustable form
5
to
30
seconds. Only modulation mode has this
parameter setting. Press S button after scrolling through and completing all settings
to start the therapy program. The the
s
and
t
buttons can be used to increase
s
or decrease
t
the intensity level.
MICROCURRENT SETTING
2
1
3
1
2
3
2
4
5
4
5
Live Pain Free, Live Good Today!
LG QUAD Combo
™
