37
EN
Height Adjustable Tray (On Some
Models)
The tray on the left side can be adjusted to a
high or low position to accommodate utensils or
cutlery of different sizes. Remove dishes before
adjusting the tray. Adjust the tray by sliding the
lever.
Removing the Cutlery Rack (On
Some Models)
The entire cutlery rack can be removed if more
space is needed on the upper rack for larger
items.
Always remove the cutlery from the rack before
removing the rack.
Pull the rack out to the end of the rails. Then,
lift the front of the rack so that the rollers clear
the stop on the end of the rail. The rack can
now be slid forward and removed from the rails.
WARNING
•
Be careful when loading and unloading items
with sharp edges. Load sharp knives with the
blade down to reduce the risk of injury.
Adding Cleaning Agents
Adding Detergent to the
Dispenser
•
Remove the label on the dispenser prior to
running the appliance for the first time.
•
The amount of detergent needed depends on
the cycle, load size, and soil level of dishes.
•
Put detergent into the detergent compartment
before starting any cycle, except the Rinse
cycle.
1
Push the button on the dispenser lid to
open the cover.
2
Add dishwashing detergent to the main
wash compartment until the level is
between the lines marked 15 and 25.
•
Fill to over the 25 line for hard water or
heavily solied loads.
•
Fill to the 15 line for soft water or lightly
solied loads.
15
25
3
Push the detergent lid to slide the lid closed
until it clicks.
Summary of Contents for XD3 15 Series
Page 56: ......
