22
EN
Using the Appliance
1
Press the Power button.
The unit will turn on. Check the indicators.
2
Check that there is rinse aid and
dishwasher salt present.
Refill the rinse aid and the salt, if the
corresponding icons illuminate. For more
information, refer to Refilling section.
•
: Salt refill icon
•
: Rinse aid refill icon
3
Open the door and check the filters.
Always clean the filter either after a wash or
before a wash so that it does not impair the
washing performance.
4
Ensure the spray arms can
unobstructedly rotate.
Ensure that the upper spray arms and the
lower spray arms rotate well. Remove the
spray arm and clean it if it does not rotate.
5
Load the dishes in the rack.
Make certain that no dishes or utensils are
in the path of the spray arms.
Do not place one dish on top of another.
6
Add the proper amount of detergent
powder to the dispenser.
If using Tablets, they can simply be placed
directly on the base of the tub, or on the
lower part of the inner door.
15
25
7
Set and start the programme.
The programme will start automatically in 4
seconds after any setting is selected.
WARNING
•
Do not load any items in upper rack when the
lower rack is pulled out and loaded. Failure to
do so may result in injury as the appliance
could become unbalanced and topple over.
•
Push the upper rack in all the way.
•
Empty the lower rack first and then the upper
one. It will avoid water dripping from the upper
rack onto the dishes below.
•
Do not open the door during operation or right
after it has completed the wash cycle as the
steam may cause scalding as the door is
opened.
NOTE
•
Never use liquid dishwashing detergent in the
appliance.
Summary of Contents for XD3 15 Series
Page 56: ......
