LG WWT-1710B Owner'S Manual Download Page 29

Page: 29 / 72

OPERATION-WASHER

ENGLISH

Control Panel and Programme Table

Control Panel Features

Description

Power

On/Off Button

• Press this button to turn the washing machine on.

Programme Buttons

• Programmes are available according to the clothes type.
• The lamp will light up to indicate the selected programme.

Start/Pause

Button

• This button is used to start the wash programme or pause the wash programme.
• If a temporary stop of the wash programme is needed, press this button.

Customizing Washing Programme Buttons / Extra Options and Functions

• Use these buttons to select the desired options for the selected programme. Not all options

are available in each programme.

• To use the extra functions, press and hold the corresponding button for 3 seconds. The

corresponding symbol lights up in the display.

Remote Start

With the

LG ThinQ

app, you can use a smartphone to control your appliance remotely.

• In order to use this function, refer to

SMART FUNCTIONS

Wi-Fi

Press and hold the

Wash

button for 3 seconds to initiate the connection of the appliance to the

LG ThinQ

application.

Summary of Contents for WWT-1710B









































































Search results

Summary of Contents for WWT-1710B

Reviews:

Related manuals for WWT-1710B

Brands by name

Popular brands

LG WWT-1710B, Owner'S Manual

Search results

Summary of Contents for WWT-1710B

Reviews:

Related manuals for WWT-1710B

Brands by name

Popular brands