42
TROUBLESHOOTING
EN
Appliance does not
operate.
Control panel has powered off due to inactivity.
• This is normal. Press the
Power
button to turn the appliance on.
Appliance is unplugged.
• Make sure that the cord is plugged securely into a working outlet.
Water supply is turned off.
• Turn the water supply tap completely.
Controls are not set properly.
• Make sure that the programme is correctly set. Close the door and press
the
Start/Pause
button.
Door is open.
• Close the door and make sure that nothing is caught under the door
preventing it from closing completely.
Circuit breaker/fuse is tripped/blown.
• Check house circuit breakers/fuses. Replace fuses or reset breaker. The
appliance should be on a dedicated branch circuit. The appliance will
resume the programme where it stopped once power is restored.
Control needs to be reset.
• Press the
Power
button, then reselect the desired programme and press
the
Start/Pause
button.
Start/Pause was not pressed after a programme was set.
• Press the
Power
button, then reselect the desired programme and press
the
Start/Pause
button. The appliance is turned off if the
Start/Pause
button is not pressed within a certain time.
Extremely low water pressure.
• Check another tap in the house to make sure that household water
pressure is adequate.
Appliance is heating the water or making steam.
• The drum may stop operating temporarily during certain cycles, while
water is safely heated to a set temperature.
Buttons may not
function properly.
The Child Lock option is activated.
• Deactivate the
Child Lock
option if necessary.
Door does not open.
The door cannot be opened for safety reasons once the appliance starts.
• This is normal. You can safely open the door after
H
turns off.
Symptoms
Possible Cause & Solution
Summary of Contents for WVC9-1410W
Page 47: ......