background image

roduct Features

P

3 Step washing

3 step washing makes the best washing performance with  low tangling.

l

FUZZY logic control

A built-in load sensor automatically detects the laundry load and a microprocessor optimizes 
washing conditions such as ideal WATER LEVEL and washing time.

l

Advanced technology is built into the Electronic Control System which ensures the best 
washing  result.

l

START

WASHING

AUTO

POWER

OFF

SENSING

Laundry Sensor

Water Level Sensor

SETTING

Optimum

Washing

Condition

Rubbing

Rubbing and

Shaking

Shaking and

Disentangling

TurboDrum washing 

When "Punch + 3" washing wings turn, the washing tub turns in the 
opposite direction. This makes the both sides current of water which 
improve wash-performance by rubbing clothes strongly.

l

EXTRA CLEANING 

l

The purpose of this cycle is to reduce detergent residues during the washing and
rinsing cycles. In order to implement this effect the washer adds one rinsing cycle.
(Total 3 rinsing cycles)

Washer doesn't operate while the lid is open. If the lid is open during the wash, rinse 

or spin cycles, the operation stops for safety.

NOTE

: Be sure to remove the product from the carton base, 

otherwise the machine will not be able to operate properly.

3

Summary of Contents for WTL-8KG10









































Reviews: