LG WTL-8KG10, Owner'S Manual

Page: 17 / 40

Close the lid Finish Caution & Note
ST STAR ART
PAUSE USE
* The pulsator rotates for
8 seconds to detect the
laundry load.
* Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied. * Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed. * When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.
* If water is already in the tub, or putting
wet laundry into the tub before starting
will increase the WATER LEVEL.
* With lightweight bulky loads, WATER
LEVEL can be set low.
* Changes to Water Temperature
(HOT/COLD) and water level are
possible during operation.
(refer to page 14)
3 5 6
7
6
7
6 4
4
7
6
4
* When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
* Washing with HOT water may damage
the laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg.
* In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.
* When static pressure of water is more
than 2kg/cm
2
, the QUICK WASH course
will be within 19min.
7
6 4
17