background image

5

SAFETY INSTRUCTIONS

ENGLISH

• Do not modify the power plug provided with the appliance. If it does 

not fit the power outlet, have a proper outlet installed by a qualified 

electrician.

•  This appliance must be earthed / grounded via the mains supply lead. 

In the event of malfunction or breakdown, grounding will reduce the 

risk of electric shock by providing a path of least resistance for electric 

current.

• This appliance is equipped with a power cord having an equipment-

earthing / grounding conductor (earthing pin) and a grounding 

power plug. The power plug must be plugged into an appropriate 

outlet socket that is installed and earthed / grounded in accordance 

with all local codes and ordinances.

• Improper connection of the equipment-grounding conductor can 

result in risk of electric shock. Check with a qualified electrician or 

service personnel if you are in doubt as to whether the appliance is 

properly grounded.

• Tighten and secure the drain hose at connecting ends to avoid 

separation.

• For models with only one inlet water supply valve, do not connect to 

hot water. Connect to cold water only.

Operation

• Do not apply any sharp objects to the control panel in order to 

operate the appliance.

• Do not attempt to separate any panels or disassemble the appliance.
• Do not repair or replace any part of the appliance. All repairs and 

servicing must be performed by qualified service personnel unless 

specifically recommended in this Owner's Manual. Use only 

authorized factory parts.

• Do not put animals, such as pets into the appliance.
• Keep the area underneath and around the appliance free of 

combustible materials such as lint, paper, rags, chemicals, etc.

•  Do not leave the appliance door open. Children may hang on the door 

or crawl inside the appliance, causing damage or injury.

Summary of Contents for WTG9020B





































Reviews: