LG WR-1820, Service Manual, Page: 8 / 30

- 8 -
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
2.2 AIR HANDLING PARTS
2.2.1 COVER (AT THE TOP)
1. Remove the front grille. (Refer to section 2.1.1)
2. Remove the cabinet. (Refer to section 2.1.2)
3. Remove 11 screws which fasten the brace and
covers.
4. Remove the covers and the brace. (See Fig. 4)
5. Re-install the components by referring to the
removal procedure, above.
2.2.2 BLOWER
1. Remove the cover. (Refer to section 2.2.1)
2. Remove the 3 screws which fasten the
evaporator at the left side and the top side.
(See Fig. 4)
3. Move the evaporator sideward carefully.
4. Remove the 2 terminals carefully
(See Fig. 5, at Electric Heater Model)
5. Remove the 3 screws which fasten the Heater
Cover.
(See Fig. 5, at Electric Heater Model)
6. Remove the Heater Cover.
(See Fig. 5, at Electric Heater Model)
7. Remove the orifice from the air guide carefully.
(See Fig. 6, No orifice at Electric Heater Model.)
8. Remove the clamp which secures the blower with
plier. (See Fig. 6)
9. Remove the blower with plier or your hand
without touching blades. (See Fig. 7)
10. Re-install the components by referring to the
removal procedure, above.
Figure 4
Figure 5
Figure 6
Figure 7