LG WM2277H Series, Training Manual

Page: 59 / 82

WM2277 WASHER PAGE 60 of 84 TRAINING MANUAL
DISASSEMBLY/REPAIR
(Damper)
1. Disconnect the dampers from
the tub and the base. (See
photos, left.)
Be sure to press in the safety
tab before pushing the pin out
of the damper. You can use a
socket to hold the tab in while
you squeeze the pin with the
special tool 383EER4003A .
2. The flat end of the tool goes on
the small end and the split end
allows the head end to pass
through while the pin is pushed
out.
The color and/or appearance of
the damper may vary by model.
3. Use special tool 383EER4003A
to remove the damper pins. If
you are replacing the dampers,
you’ll have to remove both
ends. If you are removing the
tub for major repair work,
disconnect the damper ends at
the base and leave the other
ends connected until you
remove the tub. When putting
the tub back into the machine,
connect the dampers to the tub
first. It is much easier that way.
4.
Be careful not to pull the
dampers apart while they are
disconnected.