34
EN
5
Press the
Start/Pause
button to start.
6
After the programme is complete, leave the
door open to dry the door opening, gasket, and
door glass.
CAUTION
•
Leave the door open to dry the drum interior but
only if it is safe and any children are supervised.
Cleaning the Water Inlet Filter
Water inlet filter collects lime or any small objects
that may be in water supplied to the appliance.
Clean the water inlet filter regularly.
NOTE
•
Turn off the supply tap to the appliance if the
appliance is to be left for a certain period of time
(e.g. holiday), especially if there is no floor drain
(gully) in the immediate vicinity.
•
1E
message will be displayed on the control
panel when the water is not entering the
detergent drawer.
•
If the water is very hard or contains traces of
limescale, the filter on the water inlet may be
clogged.
1
Turn off the water tap and unscrew the water
inlet hose.
2
Clean the filter using a medium bristle tooth
brush.
Cleaning the Drain Pump Filter
The drain filter collects threads and small objects
left in the laundry. Check regularly that the filter is
clean to ensure smooth running of your appliance.
Allow the water to cool before cleaning the drain
pump filter. Open the door in an emergency or
perform a emergency evacuation.
1
Unplug the appliance.
2
Open the cover cap and pull out the hose.
3
Unscrew the drain plug
a
, and then drain the
water. Slowly unscrew the drain pump filter
b
to drain the water and remove small objects.
4
After cleaning the drain pump filter, take the
drain pump filter out and insert the drain plug.
5
Close the cover cap.
CAUTION
•
Be careful when draining, as the water may be
hot.
•
Run the drum cleaning programme once a
month (or more often, as needed) to remove
excess detergent and other debris.
