background image

FEATURES

Corner Master

By having adopted a brand new concept design that is appropriate for 

walls, the Robot Cleaner's cleaning performance is incredibly efficient.

Learning Mode

The Robot Cleaner is capable of memorizing the cleaning environment 

via its Smart Operation feature for smarter cleaning.

Turbo Mode

In the Turbo mode, the Robot Cleaner operates the suction motor and 

the brushes at a greater speed giving cleaner results.

When selected, the "Turbo" mode is automatically activated on carpets, 

which enables the Robot Cleaner to run more efficiently.

Drawer Mop Plate (Option)

The "Drawer mop plate" makes it much easier for users to fit and remove 

the mop without having to turn over the device.

My Space Mode

By commanding it to clean a particular area, the Robot Cleaner quickly 

cleans that desired area.

Repeat Cleaning

The Robot Cleaner will continuously clean until the battery runs out.

Location Search Function

If the Robot Cleaner is moved from a spot while operating, the device will 

automatically search for the previous location and return to the spot from 

where it was interrupted.

Zigzag

Summary of Contents for VSR6600







































Reviews: