LG VH920 Series, Manual

Page: 19 / 27

3
4
2
Make the boss in front of vacuum cleaner station
embed in groove of vacuum cleaner vibration plate.
Make the boss below vacuum cleaner mosaic to
the bulge of vacuum cleaner station.
When the vacuum cleaner is placed correctly,
the UV lamp indicator window show blue light.
boss
groove
bulge
开
关
5
Put vacuum cleaner into vacuum cleaner station
Product using instructions
Use it as shown in the diagram
Product using instructions
1
Insert the power plug into the power
socket.
When the power plug is inserted into
the power socket, it makes a sound with
‘ddee~’ sound.
Touch power switch must be pressed for
operation.
If touch switch is pressed vacuum cleaner
is converted to operation status with a
buzzer sound ‘ddee~’, and the Indicator
lamp turns on
．
When you press the touch switch of the
power indicator part, the operation stops
with the buzzer sound “ddee~”, and the
lamp is turned off.
ddee~
ddee~
When you want to stop the operation.
When you use vacuum cleaner station
Insert the power plug of the vacuum
cleaner into the power socket.
blue lamp indicator window
is turned on, and
starts operation
for the ultraviolet irradiation at the same
time.
If it passes about 5 minutes after placing the
, the indicator window lamp
and UV lamp are automatically turned off at the
time, and the ultraviolet irradiation is
If you want to repeat ultraviolet irradiation,
please lift the
and place it on the station again.
18
After you place the vacuum cleaner on the
station, on the
UV lamp
vacuum cleaner
same
completed.
When you stop
the operation , please place the vacuum
cleaner on the station for 5 minutes
ultraviolet irradiation.
vacuum cleaner for about 15
seconds