ENG
ENGLISH
36
INSTALLATION MENU
Bluetooth Sound Sync
-
Bluetooth Sound Sync enables Bluetooth sound from the mobile device of player. If this value is enabled, phone can pair to
TV and user can hear the sound of player through the TV.
-
Supported device : Mobile device based on Android (higher than v4.4 Kitkat) / iOS
»
support the lower than v4.4 (Kitkat) on the LG mobile device based on Android
-
Supported version : Higher than Bluetooth 3.0
Alljoyn
(Depending on model)
-
Alljoyn enables Alljoyn service so it can connect the devices through the local ntework in the room. (Only same IP or PLC
Not Bluetooth.)
DIAL
(Depending on model)
-
With this DIAL service, you can launch the target app at Smart Home Launcher bar without select the target app by remote
controller. The target app should be already selected at Installer Menu > General > Preloaded App.
TV Name
-
When other media device(ex: smart phone, desktop, laptop) searching TV, this string was displayed.
SoftAP
-
If you want to use SoftAp menu on
MEDIA SHARE
menu, you must select ‘Yes’ in this item.
A SoftAP is a function of TV which is used like Access Point.
Use Default
-
If you want to use default password(this password was generated randomly), you must select ‘yes’ in this item.
Security Key
-
When guests want to use TV’s SoftAP function, they need this password. If you want to change this default password, you
need to Change ‘Use Default Setting’ value into ‘NO’.
Wi-Fi Signal Strength
-
You can control wireless signal strength on SoftAP mode. This is controlled by 5 step. If you select ‘Not Used’, wireless signal
strength will be set to Max value.
Wi-Fi Channel
-
You can control wireless channel on SoftAP mode. This is controlled from 1 to 11 channel. If you select ‘Auto’, wireless
channel of SoftAP will be set to random channel.
