LG THRILL 4G, User Manual

Page: 50 / 114

48
3D Camera Viewfinder
Taking a 3D photo
1 Open the Camera application.
2 Slide the 3D Switch to the right.
3 Holding the phone horizontally, point the lens towards the subject you want to photograph.
4 Touch and hold the Capture Button lightly and a focus box will appear in the center of the
viewfinder screen.
5 When the focus box turns green, the camera has focused on your subject.
6 Release the Capture Button .
3D Camera
3D Focus – You can manually fine-tune the 3D focus by adjusting the amount of
overlapping.
Brightness – This defines and controls of the amount of sunlight entering the lens. Slide
the brightness indicator along the bar, towards “-” for a lower brightness
image or towards “+” for a higher brightness image.
Settings – Tap this icon to open the settings menu. The options are similar to the 2D
camera with the addition of 3D focus mode.
3D focus mode – Select the auto 3D focus option from Border and Center .
Border uses a border area for optimizing the amount of overlapping. Center
uses a center area for it. You can also find-tune manually with the 3D focus
function on the viewfinder.
Image size – Tap to set the size of the 3D photo you will take. Set your 3D
photo image size as 3M (2048X1536) , 2M (1600X1200) , or 1M (1280X960) .
Flash – Allows you turn on the flash when taking a picture in a dark place.
Camera Switch - Allows you to switch between the front and back cameras.