36
EN
Error Codes
Symptoms
Reason
Solution
The door has been opened
while the appliance is in
operation or the appliance is
being operated without the
door being closed properly.
•
Close the door completely.
•
If the icon is not released, call
for service.
dE4
Door switch detection is not
working properly.
•
Unplug the power plug and
call for service.
The drum does not have lint
filters or the lint filters are
not in position inside the
drum.
•
Assemble the lint filters in
properly position. If the icon
keeps appearing on the
screen, call for service.
Temperature Sensor has
malfunctioned.
•
Unplug the power plug and
call for service.
The temperature inside the
drum has risen suddenly.
•
Unplug the power plug and
call for service.
The motor has stopped
suddenly.
•
Check if the amount of
laundry exceeds the maximum
load capacity.
•
Unplug the power plug and
call for service.
The compressor has stopped
suddenly.
•
Unplug the power plug and
call for service.
OE
The drain pump motor has
malfunctioned.
The surrounding temperature
for installation is below zero.
•
Unplug the power plug and
call for service.
•
The recommended
surrounding temperature for
installation is 5 – 35 °C.
