12
EN
•
The outlet of the drain hose should not be
submerged in water.
•
Make sure the drain hose is not kinked.
Levelling the Appliance
Checking the Level
Levelling the appliance prevents unnecessary
noise and vibration. Check whether the appliance
is perfectly level after installation.
•
If the appliance rocks when pushing the top
plate of the appliance diagonally, adjust the feet
again.
Adjusting and Levelling the Feet
When the appliance is not perfectly level, turn
the adjustable feet until the appliance no longer
wobbles.
•
Turn the adjustable feet clockwise to raise
or turn the adjustable feet counterclockwise
to lower from front-to-back, side-to-side and
corner-to-corner.
NOTE
•
Do not insert pieces of wood etc. under the
feet.
•
Timber or suspended type flooring will
contribute to excessive vibration and
unbalance. Reinforcing or bracing the timber
floor may need to stop or reduce excessive
noise and vibration.
•
Do not install the appliance on any elevated
surface or platform, as it may become unstable
and cause serious injury and damage.
•
If the appliance is installed on a uneven, weak
or tilted floor causing excessive vibration, spin
failure or
UE
error can occur. It must be placed
on a firm and level floor to prevent spin failure.
