LG STB-5500 Commercial Mode Setup Manual Download

Page: 54 / 97

206-4310

FTG CONFIGURATION LIST

Data to be saved in FTG

Configuration (.tlx) file.

FTG File Manager Utilities Overview (Cont.)

Note: The data referenced in the FTG Configuration List is only a snap-

shot of the current FTG Channel Map and FTG Installer Menu settings

when copied to the list. If you make any change(s) to the current data

to be included in the FTG Configuration List, you will need to recopy

Channel Map and Installer Menu settings to the FTG Configuration List.

Load default FTG Installer

Menu for STB-5500.

Copy FTG Channel Map

to and from FTG

Configuration List.

Filename of opened FTG

Configuration (.rml) file

created using FTG Device

Configuration Application.

NEW/OPEN

TLX File options.

CLEAR/SAVE

FTG Configuration

and Setup Menu List

options.

SETUP MENU LIST

STB setup menu data to be

saved in FTG Configuration file.

TLX FILE CONTENTS

Data contained in opened

FTG Configuration (.tlx) file.

FTG File Manager Main Screen

The FTG File Manager main screen enables you to compile, modify, and save FTG Configuration (.tlx)

files. It also allows you to change the Zone assignment for each Installer Menu profile, if desired (see

Reference section, “Using the STB’s Zoning Features,” for further information).

Copy FTG Installer Menu

settings to and from FTG

Configuration List. Assign

Zone as applicable.

Summary of Contents for STB-5500


































































































Search results

Summary of Contents for STB-5500

Reviews:

Related manuals for STB-5500

Brands by name

Popular brands

LG STB-5500, Commercial Mode Setup Manual

Search results

Summary of Contents for STB-5500

Reviews:

Related manuals for STB-5500

Brands by name

Popular brands