LG STB-3000 Setup Manual Download

Page: 31 / 86

206-4272

As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to

indicate the STB’s current configuration mode. The table below lists all possible mode identifiers

for the STB-3000.

Acronym

Description

CPU-CTV

Pass-through Mode with Channel Map in CPU

CPU-FTG

FTG Mode via CPU

CPU-P:C

Application Tuning Mode via CPU

MPI-EXT

External MPI Control

PTC-CTV

Pass-through Mode with Channel Map in PTC

Using the Installer Menu

Refer to the table starting on the next page for an overview of the available Installer Menu items,

including their item numbers, functions, value ranges, and default values.
Installer Menu items not relevant to the STB are not present in the Installer Menu; therefore, some

numbers are missing. For example, item 006 will not appear. In addition, items that are dependent

on other Installer Menu item settings will not be initially accessible. For example, item 046 STRT

AUX SRCE will not display in the Installer Menu unless item 004 STRT CHANNEL is set to 0. See

Installer Menu detailed descriptions for further information.

Navigation within the Installer Menu

Use the Up/Down arrow keys on the Installer Remote to sequence through the available menu items,

or access an item directly by keying in the item number and then pressing

MENU

. For example, to

access the SLEEP TIMER option, which is item 015, press 0-1-5 + MENU.

Changing Installer Menu Settings

To change an Installer Menu item value, use the Left/Right arrow keys on the Installer Remote, or

enter a valid value directly. To save the new setting, press

, or use the Up/Down arrow keys to

navigate to a new Installer Menu item if you have additional items to edit. Note that invalid values

will not be saved.

Exiting the Installer Menu and Activating Settings

After you have adjusted all required Installer Menu item settings, press

once on the Installer

Remote to save your changes; then, press

again to exit the Installer Menu. Any changes you

make will be stored in non-volatile memory.

Note:

Each time you exit the Installer Menu in Pass-through Mode, all V-Chip (Parental Control)

settings in the STB are reset to their default values; that is, the Lock System, if previously enabled

from the Lock setup menu, will now be disabled, and the individual Parental Control settings will be

restored to default values.

Installer Menu (Cont.)

Caution: Installer Menu settings may affect options available

from the STB setup menus or the Function Menu.

Summary of Contents for STB-3000























































































Search results

Summary of Contents for STB-3000

Reviews:

Related manuals for STB-3000

Brands by name

Popular brands

LG STB-3000, Setup Manual

Search results

Summary of Contents for STB-3000

Reviews:

Related manuals for STB-3000

Brands by name

Popular brands