LG STB-3000 Setup Manual Download

Page: 17 / 86

206-4272

EZ-Manager Wizard (Cont.)

Initiate Configuration or Exit the EZ-Manager Wizard

The Welcome screen provides a brief introduction to the EZ-Manager Wizard.

WELCOME TO LG’S EZ-MANAGER WIZARD

EXIT

NO PRO:CENTRIC

Use this setup wizard to configure the STB for Pro:Centric and/or Free-To-Guest (FTG) operation.

Select NEXT to continue.

If a Pro:Centric Server will not be installed and/or you do not wish to use the wizard to configure this STB for

FTG Mode, you may exit the wizard.

Select NO PRO:CENTRIC to disable the Pro:Centric feature of this STB, or select EXIT to quit.

This setup wizard will start automatically in 10 seconds.

Note:

If there is no user action in this screen within 10 seconds, the wizard will proceed to the

first configuration step. Once the wizard has proceeded, it is not possible to return to the Welcome

screen; however, if you simply wish to exit the wizard, you can do so by selecting the “EXIT” option

from the subsequent screen(s).
From the Welcome screen, you have the following options:
• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select/

highlight

NEXT

and press

Then, continue to the “STB Configuration Options” section on the

following page.

• To exit the wizard, but retain the use of the Pro:Centric remote management feature on this STB

(i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use the arrow keys on

the Installer Remote to select/highlight

EXIT

and press

. In the confirmation pop-up window,

select

, and then press

once more on the Installer Remote.

• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the

wizard’s Zoning or USB configuration options, exit the wizard as follows: Use the arrow keys

on the Installer Remote to select/highlight

NO PRO:CENTRIC

and press

. This will disable

the Pro:Centric feature of this STB (i.e., Installer Menu item 119 DATA CHANNEL will be set to

0) and exit the wizard. In the confirmation pop-up window, select

, and then press

once

Summary of Contents for STB-3000























































































Search results

Summary of Contents for STB-3000

Reviews:

Related manuals for STB-3000

Brands by name

Popular brands

LG STB-3000, Setup Manual

Search results

Summary of Contents for STB-3000

Reviews:

Related manuals for STB-3000

Brands by name

Popular brands