Rotisserie
Installation & Cooking
34
Insert the shaft of right
plate into the shaft of
motor.
To Clean ROTISSERIE &
METAL TRAY
When cooking is completed,
separate the ROTISSERIE from
the food. Take care when
handling ROTISSERIE, metal
tray and food stuff as it is very
hot. During cooking it is normal
for the ROTISSERIE & metal tray
to be stained from the food.
Simply clean the ROTISSERIE &
metal tray with a warm soapy
water and a soft cloth. If the
ROTISSERIE & metal tray
remain stained after washing,
soak utensils in hot soapy water
for a few minutes.
Do not use metal scouring
pads. They will scratch the
surface .
Put the shaft of left plate on the
holder of rotisserie.
Press
START
.
After cooking, hold the rotisserie bar of both side with the handle and lift up
the left end lightly and pull out from the right end.
NOTE:
1. The rotisserie cooking is convenient for grilling of meat and poultry.
All the surface of the food will become even brown without overturning.
2. The rotisserie cooking can be used in Grill mode, Convection mode and
Speed Auto Cook mode.
3. The rotisserie bar is used for rotisserie cooking only. After rotisserie cooking
is finished remove the rotisserie bar and store with other accessories.
CAUTION
1. DO NOT USE THE ROTISSERIE WITH NO LOAD, IT WILL DAMAGE THE OVEN.
2. AFTER COOKING, THE METAL TRAY WILL BECOME EXTREMELY HOT.
3. It is recommended to remove the grease from the turntable every time before
cooking. Hot grease on the turntable may cause smoke.
