24
EN
Using the Energy Control
Function (Optional)
1
Turn the appliance on.
2
Press
Energy Ctrl
button.
•
Press
Energy Ctrl
button repeatedly to
select each step.
NOTE
•
1 step : The power Input is decreased by 20
% compared to rated power input.
−
is displayed on the display screen.
•
2 step : The power Input is decreased by 40
% compared to rated power input.
−
is displayed on the display screen.
•
3 step (Optional) : The power Input is
decreased by 60 % compared to rated power
input.
−
is displayed on the display screen.
•
(1 step),
(2 step),
(3 step) is
displayed on some indoor units.
( (1 step), (2 step) is displayed on some
indoor units.)
•
This function is available with Cooling Mode.
•
Capacity may decrease when Energy Control
mode is selected.
•
Desired temperature is displayed about 5
seconds if you press
Fan Speed
,
or
button.
•
Room temperature is displayed about 5
seconds if you press
Room Temp
button.
Using the Generator Mode
Function (Optional)
This function operate air conditioner under the
previously set power consumption.
1
Turn the appliance on.
2
Press
Gen Mode
button.
•
is displayed on some indoor units.
•
Press
Gen Mode
button repeatedly to
select each step.
NOTE
•
Operate the appliance by setting the set
power consumption to the value displayed on
the indoor unit.
•
The Unit of the displayed value is kVA.
•
1 Step
−
is displayed on the display screen.
−
The cooling capacity is approximately 60 %
of the rated capacity.
•
2 Step
−
is displayed on the display screen.
−
The cooling capacity is approximately 75 %
of the rated capacity.
•
3 Step
−
is displayed on the display screen.
−
The cooling capacity is approximately 90 %
of the rated capacity.
•
This function is available with Cooling Mode.
•
This function is disabled when you press
Mode
or
Jet Mode
button.
•
When using Generator Power Supply, air
conditioner must use ‘Gen Mode’.(It may not
operate properly in Normal Mode.)
Summary of Contents for S4NQ09AA3QA
Page 115: ...Memo ...
Page 116: ......
